Código: JL188AL
HP 103 Instant 802.11n (WW) AP
The multifunctional Aruba RAP-100 series delivers secure 802.11n wireless and wired networking to SMBs and access to corporate resources from branch and home offices.
Marca:ARUBA
Disponibilidad: 30/35 días habiles.
-
Features and Benefits
Advanced Features
ClientMatch technology eliminates sticky clients by continuously gathering session performance metrics and using this information to steer them to the best AP and radio.
ARM technology delivers best-in-class RF management, including automatic transmit power and channel control with auto coverage-hole correction.
Zero-touch provisioning as well as automated firmware upgrades and inventory management with the cloud- based Aruba Activate service.
Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
Security:
- With a WebCC subscription, Aruba Instant RAPs deliver integrated web filtering to every device connected to the WLAN
- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
- SecureJack-capable for secure tunneling of wired Ethernet traffic
- VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point and does not supply the Instant AP with any configuration.
Wireless Radio Specifications
AP type: Dual-radio, dual-band 802.11n indoor
Software-configurable dual radio supports 2.4 GHz and 5 GHz
2x2 MIMO with two spatial streams and up to 300 Mbps wireless data rate per radio
Supported frequency band (country-specific restrictions apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.875 GHz
Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
- 802.11n: 2x2 MIMO with two spatial streams
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate) transmit power (limited by local regulatory requirements):
- 2.4-GHz band: +21 dBm
- 5-GHz bands: +21 dBm
Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay diversity (CDD) for improved downlink RF performance
Short guard interval for 20-MHz and 40-MHz channels
Space-Time Block Coding (STBC) for increased range and improved reception
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)
802.11n high-throughput (HT) support: HT 20/40
802.11n packet aggregation: A-MPDU, A-MSDU
Power
Supported power sources:
- 802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port NOTE: When using PoE, the USB port will be enabled only when an 802.3at-compliant source is used
- 12 volts from external power adapter (sold separately)
Maximum power consumption:
- Without USB device connected: 12.5 watts
- With USB device: 15 watts
Encrypted Throughput
Max IPsec encrypted wired throughput = 20 Mbps
Antennas
RAP-108: Two RP-SMA connectors for external dual-band antennas
RAP-109: Four integrated omni-directional antennas for 2x2 MIMO with maximum antenna gain of 5.0 dBi in both 2.4 GHz and 5 GHz. Built-in antennas are optimized for vertical orientation
Interfaces
Network:
- ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
- ENET1 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
One port for DC power connector
One USB 2.0 port (Type A connector)
One serial console interface (RJ-45)
Visual indicators (LEDs):
- Power/system status
- Ethernet link status (2x)
- Radio status (2x)
Kensington security slot
Reset button
Mounting
Desktop (vertical): Using stand supplied with product
Wall (vertical): Using optional wall mount accessory
Ceiling (horizontal, not recommended for RAP-109): Using optional ceiling mount accessories
Mechanical
Dimensions (unit):
- Excluding desk mount:
160 mm (W) x 43 mm (D) x 160 mm (H)
6.30"? (W) x 1.69"? (D) x 6.30"? (H)
- With desk mount:
181 mm (W) x 72 mm (D) x 160 mm (H)
7.13"? (W) x 2.83"? (D) x 6.30"? (H)
Weight (unit):
- Excluding desk mount: 385 g (13.6 oz)
- With desk mount: 460 g (16.2 oz)
Dimensions (shipping)
- 230 mm (W) x 220 mm (D) x 90 mm (H)
- 9.06"? (W) x 8.66"? (D) x 3.5"? (H)
Weight (shipping): 750 g (1.65 lbs)
Environmental
Operating:
- Temperature: 0° C to +40° C (+32° F to +104° F)
- Humidity: 5% to 95% non-condensing
Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)